Location parameters

AlternateSizeForPackingUnits

Determines whether it is possible to select a different size (target quantity) when creating packing units. The selected size overwrites the default target quantity defined in the type data.

DisablePackAllInOne

Disables (true) or enables (false) the all-in-one packaging mode (pallet ` boxes).

UseProductFamilies

Enables the use of product families as a first filter during setup.

Admin Mode

Enables (true) or disables (false) admin mode. This allows the manual entry of data in scanning dialogs.
Default value: false

Automatic Setup Pack Transition

Specifies whether the start screen (set up) is displayed again (true) after completion of a packing unit or whether the packing process is continued with the next packing unit (false).
Default value: false

AutoComplate Mode

Enables (true) or disables (false) Auto Complete mode. If the mode is active, completion of a packing unit is triggered automatically when the target part count is reached.
Default value: false

TypeData Caching Hours

Defines the duration in hours for which the type data cache is valid before it is updated with the next request. If the value is set to 0, the type data cache is deemed to be deactivated.
Default value: 1

InvokationTimeout

Invocation timeout in milliseconds. This value specifies the duration that an asynchronous packing process may require before a timeout error is displayed to the user. Min = 20000
Default value: 60000

AllowedPackingLevels

Permitted packing levels that can be packed in the client. If set accordingly, the selection dialog for what is to be packed is omitted.
1 = Part in box or part on pallet.
3 = Box on pallet.
6 = Both levels (as before via selection dialog).
Default value: 6 (both levels)

PrintConfirmationShortcutsEnabled

Specifies whether the buttons in the print confirmation dialog can also be activated by a shortcut key or not.
Default value: false

IntervalForUpdateUserRolesAndPermissions

Defines the interval (in minutes) in which a background job in the client calls up the latest ACL (Access Control List) from the AccessControl service. The ACL is used for the user calculations.
Default value: 10

WorkflowName

Name of the workflow definition files to be requested by the client to enable user-defined processes, e.g. when packing.
Examples: myWorkflow: Queries workflow files that start with myWorkflow (and end with *.xml) in the latest version.
myWorkflow_1_0_0_0: Specifically requests files with version 1.0.0.0 and ignores definitions of higher versions.
Default value: null (do not query workflows)

Enable ReplacePart Function

Activates the Replace functionality with which a part can be exchanged within a packing unit. If the function is activated, it can be clicked on in the packing screen. Where a client workflow has been configured before packing, the value replace is passed as callingContext via the parameter additionalInformation when the Replace function is called.
Default value: false

SimulatePackBeforeWeightValidation

Specifies whether the packing process is to be simulated each time a part is scanned before the part is weighed.
Default value: false

WeightDialogStabilizationPhase

Specifies how long the scales may take to stabilize in seconds.
Default value: 2

BackgroundWeightValidationEnabled

Activates weight monitoring in the background, which can be used to detect an unauthorized change in weight during the packing process.

BackgroundWeightValidationTimeout

Specifies how long in milliseconds to wait for values from the connected scales before a timeout error is detected.

BackgroundWeightValidationUpLim

Specifies the maximum permissible weight deviation upward.

BackgroundWeightValidationLowLim

Specifies the maximum permissible weight deviation downward.

AllowedPalletRejectionUseCases

Allowed cases for canceling a two-stage pallet. Selected by the user.
RejectAllOrKeepBoxes (1) = Cancel pallet including boxes, or cancel pallet and keep boxes.
RejectAll (2) = Cancel pallet including boxes.
KeepBoxes (3) = Cancel pallet and keep boxes.
Default value: 1 (either option can be selected)

DisplayConfirmationDialogBeforeAbortPackage

Specifies whether a confirmation dialog should be displayed before canceling a packing unit. This setting can be influenced or overridden by any permissions on the AccessControl resource (SkipFunctionContirmationDialogs).
Default value: false

ForceRemainderCompletion

Specifies whether existing remainder packages must be packed before a new packaging can be started. If remainder packages have been found and this option is enabled, either through OSS-Config or Typedata, the RemainderPackages-View is shown. This setting can be overridden by an AccessControl resource (SkipRemainderCompletion).

Display Confirmation Dialog before Abort Package

If enabled, an additional confirmation dialog is displayed before AbortPackage is beeing executed.
Default value: false

Allow Change Work Center Values

If enabled, its allowed to change the values of the work center in the Client UI.
Default value: false

WorkingMode

The desired WorkingMode, can be either 10 or 13-digit. It has to be set to the same value on instance and station level! It is not supported to use 10-digit stations with a 13-digit service instance.
The 13-digit mode represents the standard packing process using TypeNumber and PackingIndex. In 10-digit mode only the TypeNumber will be used, the PackingIndex is not allowed and will not be considered in the packing process. Therefore, not all of the existing modules are available/usable in 10-digit mode.
Default value: 13-digit