Add Materials for Monitoring window

In the Add Materials for Monitoring window, materials and their target position can be entered and scanned materials can be displayed in the Scanned Material List. To open the Add Materials for Monitoring window, click on Add in the Material Monitoring page or scan a material or a target position label with a usb-connected scanner.

Add Materials for Monitoring

Element/Icon

Description

Scan Material Add

Manually scan a material by entering a label string.

A valid label string must be entered.

Scan Target Position Add

Manually scan a Target Position by selecting one of the configured locations for the alias.

delete Delete Selected

Remove the selected scanned materials from the scanned materials list

Removing the selected material does not delete the material.

checkbox

Select the material in the material list

sucess OK

Marks that a material was successfully added to the Scanned Material List

error Error

Marks that there was an error when adding a material to the scanned material list.

Scanning errors are also displayed at the top of the modal, via an Error Banner.

details Details

Open the scanned material details page.

Save

Start monitoring process for the scanned materials.

Scanned Material Details page

To open the Scanned Material Details page, click on Details in the row of the corresponding material.

Scanned Material Details

The Scanned Material Details page provides an overview of the scanned material’s properties and errors that occurred during scanning.

Scanned Material Details With Error